Ohio Well Data › Allen County
Allen County, Ohio: well depth, water level & drilling cost
✓ 7,134 ODNR records · verified 2026-09-28
Pull every recorded well near a Allen County address — $49
How deep are wells in Allen County, Ohio?
The median drilled well depth in Allen County is 70 ft, based on 7,132 wells with recorded depths in the state ODNR database. Half of all wells fall between 52 ft and 102 ft; 90% are shallower than 160 ft. Wells drilled since 2016 have a median depth of 74 ft.
How much does it cost to drill a well in Allen County?
Applying published per-foot rates to the local median depth of 74 ft: drilling and casing alone typically runs $1,850–$4,810; a complete system including pump, pressure tank, and hookup typically runs $4,440–$7,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Allen County?
The median static water level is 27 ft below ground surface (middle half of wells: 18 ft–40 ft), from 6,757 measurements.
How much water do wells in Allen County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 6,488 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Allen County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
See every driller with wells on record in Allen County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Allen County.
Well records by ZIP code in Allen County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Lima (45806) — 1,451 wells, median 81 ft
- Lima (45801) — 1,039 wells, median 66 ft
- Elida (45807) — 804 wells, median 60 ft
- Bluffton (45817) — 710 wells, median 60 ft
- Delphos (45833) — 701 wells, median 65 ft
- Lima (45805) — 668 wells, median 90 ft
- Harrod (45850) — 655 wells, median 73 ft
- Spencerville (45887) — 550 wells, median 73 ft
- Lima (45804) — 470 wells, median 80 ft
- Lima (45802) — 228 wells, median 75 ft
- Cairo (45820) — 132 wells, median 43 ft
- Gomer (45809) — 106 wells, median 71 ft
- Lafayette (45854) — 89 wells, median 65 ft
- Beaverdam (45808) — 72 wells, median 60 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.