Ohio Well Data › Harrison County
Harrison County, Ohio: well depth, water level & drilling cost
✓ 1,749 ODNR records · verified 2026-09-28
Pull every recorded well near a Harrison County address — $49
How deep are wells in Harrison County, Ohio?
The median drilled well depth in Harrison County is 123 ft, based on 1,748 wells with recorded depths in the state ODNR database. Half of all wells fall between 84 ft and 180 ft; 90% are shallower than 240 ft. Wells drilled since 2016 have a median depth of 160 ft.
How much does it cost to drill a well in Harrison County?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Harrison County?
The median static water level is 47 ft below ground surface (middle half of wells: 25 ft–78 ft), from 1,705 measurements.
How much water do wells in Harrison County produce?
The median tested yield is 8 gpm (middle half: 3 gpm–15 gpm), from 1,695 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Harrison County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
See every driller with wells on record in Harrison County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Harrison County.
Well records by ZIP code in Harrison County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Scio (43988) — 423 wells, median 129 ft
- Freeport (43973) — 368 wells, median 130 ft
- Cadiz (43907) — 275 wells, median 125 ft
- Tippecanoe (44699) — 228 wells, median 140 ft
- Jewett (43986) — 169 wells, median 138 ft
- Deersville (44693) — 146 wells, median 105 ft
- Hopedale (43976) — 104 wells, median 140 ft
- New Rumley (43984) — 72 wells, median 116 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.