Ohio Well Data › Warren County
Warren County, Ohio: well depth, water level & drilling cost
✓ 4,360 ODNR records · verified 2026-09-28
Pull every recorded well near a Warren County address — $49
How deep are wells in Warren County, Ohio?
The median drilled well depth in Warren County is 61 ft, based on 4,357 wells with recorded depths in the state ODNR database. Half of all wells fall between 45 ft and 91 ft; 90% are shallower than 116 ft. Wells drilled since 2016 have a median depth of 47 ft.
How much does it cost to drill a well in Warren County?
Applying published per-foot rates to the local median depth of 47 ft: drilling and casing alone typically runs $1,175–$3,055; a complete system including pump, pressure tank, and hookup typically runs $2,820–$4,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Warren County?
The median static water level is 20 ft below ground surface (middle half of wells: 14 ft–27 ft), from 3,947 measurements.
How much water do wells in Warren County produce?
The median tested yield is 10 gpm (middle half: 5 gpm–20 gpm), from 3,960 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Warren County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
See every driller with wells on record in Warren County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Warren County.
Well records by ZIP code in Warren County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Franklin (45005) — 1,756 wells, median 46 ft
- Waynesville (45068) — 666 wells, median 83 ft
- Lebanon (45036) — 495 wells, median 80 ft
- Springboro (45066) — 414 wells, median 80 ft
- Morrow (45152) — 133 wells, median 85 ft
- Oregonia (45054) — 132 wells, median 77 ft
- Mason (45040) — 115 wells, median 85 ft
- South Lebanon (45065) — 99 wells, median 75 ft
- Maineville (45039) — 83 wells, median 70 ft
- Kings Mills (45034) — 57 wells, median 89 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.