Mohr Well Drilling, Inc Call (724) 588-8322

Well Drilling in Youngstown, OH

Well drilling and pump service for Youngstown homes, farms and properties. Customers report fast turnaround on service calls. Call for a straight answer on depth, cost and timing.

Call (724) 588-8322

Since 19 in business· 4.7★ on 25 Google reviews ·707 wells on file with ODNR

What we do in Youngstown

New water wells
Site evaluation, drilling, casing and screen for residential, farm and commercial wells.
Replacement wells
When an old well fails, silts up or goes dry — new well, and the old one decommissioned to ODNR standards.
Well pumps and pressure tanks
Submersible pump sizing, replacement, pressure tank and controls.
Low-yield and dry wells
Deepening, hydrofracturing and pump reset when a well stops keeping up.
Well inspections for real estate
Flow test, water sample and report for a purchase or sale.
Well decommissioning
Abandonment sealed and reported to ODNR.

Need a well in Youngstown? Get a straight answer on depth and cost.

Call (724) 588-8322

Our work around Youngstown

3

wells drilled in Mahoning County since 2010, on file with ODNR.

Also drilled inWells since 2010
Trumbull County141
Ashtabula County9

Counts are well reports filed with ODNR under this company's name. See every well on record.

Bob Mohr, founder of Mohr Well Drilling, smiling indoorsMohr Well Drilling red cable tool drilling rig at a job siteJake and Jon Mohr standing in front of Mohr Well Drilling company truck

Reviews, and what a well costs near Youngstown

4.7

out of 5 from 25 Google reviews — read them all.

“I have a very old farmhouse and the plumbing is less than pleasant to access and deal with. I have been able to rely on Mohr for fast, friendly service at a very reasonable price from something as simple as replacing a bad shutoff valve to installing a brand new well pump and undoing some of the issues the previous owners left behind. I would highly recommend them to anyone who needs any kind of well services!”

Victor S. · Google review · 6 months ago

“What a great experience we had with this company! We had been without water for several days when we called. They came the first thing the next morning, promising they would do everything possible to get us water. It was extremely difficult as the pipe going to the well was frozen! Our huge neighborhood groundhog apparently had a large hole near the house and under the pipe!! In sub freezing temperatures, they worked feverishly to get us water, which they did. If I could give 10 stars, if I could. Thank you!!”

Patty W. · Google review · 7 months ago

“Great company! We called first thing on Monday morning since we lost water over the weekend, the secretary was very nice and stated the guys would be in contact shortly as a “no water” call is a priority call. Not long after we were contacted, the guys arrived, figured out the problem, prepped the area and arrived the next morning with all the large equipment to get us up and running. They were all kind, honest, knowledgeable and professional. A great family owned and operated company. We will be using them for all our future water needs!”

Courtney F. · Google review · 4 years ago

“Awesome, friendly, great at what they do. Jake came out to help fix my pressure problem and had it fixed in a hour and a half. Super reasonable I would one hundred percent recommend as your first choice in well services hands down.”

Colby S. · Google review · 2 years ago
Mahoning County, typical 160 ft wellLowHigh
Drilling and casing$4,000$10,400
Complete system — pump, pressure tank, hookup$9,600$16,000

Typical depth is the median of ODNR well records completed in Mahoning County since 2015. Per-foot ranges: HomeGuide, Angi, The Well Guide (checked 2026-06-11). Your quote depends on your parcel.

Questions people ask about wells in Youngstown

How much does a well cost in Youngstown?

Wells near Youngstown average about 160 ft deep (Mahoning County, ODNR records since 2015). At that depth, drilling and casing typically runs $4,000–$10,400; a complete system with pump, pressure tank and hookup $9,600–$16,000. Mohr Well Drilling, Inc quotes per job after a site visit — depth, access and casing drive the number.

How deep are wells in Youngstown?

ODNR well records for Mahoning County since 2015 run about 160 ft with an average yield around 15 gallons per minute. Your parcel can differ — nearby logs are the best predictor, and Mohr Well Drilling, Inc pulls them before drilling.

Do I need a permit to drill a well in Youngstown?

A licensed driller files the well report with the state (ODNR) when the well is completed, and permit rules vary by county and watershed. Mohr Well Drilling, Inc checks what applies to your parcel and handles the filings.

How long does it take to drill a well?

Most residential wells are drilled in one to three days; pump and pressure-tank installation adds a day. Scheduling depends on season and ODNR filing lead time — call (724) 588-8322 for current lead times.

Who files the paperwork for a new well?

The driller does. Every well Mohr Well Drilling, Inc completes is reported to the state (ODNR); that record is where the county depth and yield figures on this page come from.

How much does it cost to drill a well in Ohio?

It depends almost entirely on depth. Statewide figures are useless; what matters is your county. Near Youngstown, Mahoning County wells average 160 ft, which puts drilling and casing around $4,000–$10,400 and a complete system $9,600–$16,000. Deeper parcels cost more; Mohr Well Drilling, Inc pulls neighboring well logs before quoting.

How much is a 200 ft well?

At today's per-foot ranges, a 200 ft well runs roughly $5,000–$13,000 for drilling and casing, or $12,000–$20,000 with pump, pressure tank and hookup. Mahoning County wells average 160 ft, so 200 ft is deeper than typical here.

How deep does a well have to be to produce water?

There's no fixed number — it's whatever depth reaches a water-bearing layer with enough yield. Around Youngstown, ODNR records show water at about 160 ft with yields near 15 gpm. A household needs roughly 5 gpm; Mohr Well Drilling, Inc tests yield before setting the pump.

What if my well runs dry or loses pressure?

Often it's the pump, not the well. Mohr Well Drilling, Inc tests yield and static water level first; options run from a pump reset to deepening or hydrofracturing, and a replacement well only when the numbers say so.

Talk to a driller, not a call center.

Call (724) 588-8322

Also serving

Conneaut · Lordstown · Warren · Austintown · North Kingsville · Niles · Champion Heights · Ashtabula · North Lima

Call (724) 588-8322