Ohio Well Data › Clark County › Catawba (43010)
Catawba, OH (43010): well depth, water level & drilling cost
✓ 560 ODNR records · Clark County
Pull every recorded well near a Catawba (43010) address — $49
How deep are wells in and around Catawba (43010), Ohio?
The median drilled well depth in and around Catawba (43010) is 110 ft, based on 560 wells with recorded depths in the state ODNR database. Half fall between 70 ft and 175 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Catawba (43010)?
Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Catawba (43010)?
The median static water level is 55 ft below ground surface (middle half of wells: 30 ft–80 ft), from 523 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Clark County.
Part of Clark County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.