⟁ Ohio Well Data field records · 2026 survey

Ohio Well Data › Licking County › Kirkersville (43033)

Kirkersville, OH (43033): well depth, water level & drilling cost

✓ 348 ODNR records · Licking County

87 ftmedian well depth
63 ft–130 fttypical depth range
30 ftmedian static water level
14 gpmmedian yield (333 tests)

Pull every recorded well near a Kirkersville (43033) address — $49

How deep are wells in and around Kirkersville (43033), Ohio?

The median drilled well depth in and around Kirkersville (43033) is 87 ft, based on 347 wells with recorded depths in the state ODNR database. Half fall between 63 ft and 130 ft; 90% are shallower than 187 ft.

How much does it cost to drill a well in and around Kirkersville (43033)?

Applying published per-foot rates to the local median depth of 87 ft: drilling and casing alone typically runs $2,175–$5,655; a complete system including pump, pressure tank, and hookup typically runs $5,220–$8,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kirkersville (43033)?

The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–50 ft), from 343 measurements.

Drilled depth distribution

0–50 ft 34 50–100 ft 167 100–150 ft 82 150–200 ft 36 200–300 ft 24 300–400 ft 4 400–600 ft 0 600+ ft 0
Looking at a specific property in Kirkersville (43033)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kirkersville (43033)

Free. Goes to licensed drillers working Licking County.

Part of Licking County well records.

Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.