Ohio Well Data › Licking County › Newark (43055)
Newark, OH (43055): well depth, water level & drilling cost
✓ 2,303 ODNR records · Licking County
Pull every recorded well near a Newark (43055) address — $49
How deep are wells in Newark (43055), Ohio?
The median drilled well depth in Newark (43055) is 160 ft, based on 2,300 wells with recorded depths in the state ODNR database. Half fall between 107 ft and 220 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in Newark (43055)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Newark (43055)?
The median static water level is 59 ft below ground surface (middle half of wells: 30 ft–90 ft), from 2,248 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Licking County.
Part of Licking County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.