Ohio Well Data › Licking County › Newark (43056)
Newark, OH (43056): well depth, water level & drilling cost
✓ 1,196 ODNR records · Licking County
Pull every recorded well near a Newark (43056) address — $49
How deep are wells in Newark (43056), Ohio?
The median drilled well depth in Newark (43056) is 154 ft, based on 1,195 wells with recorded depths in the state ODNR database. Half fall between 105 ft and 240 ft; 90% are shallower than 340 ft.
How much does it cost to drill a well in Newark (43056)?
Applying published per-foot rates to the local median depth of 154 ft: drilling and casing alone typically runs $3,850–$10,010; a complete system including pump, pressure tank, and hookup typically runs $9,240–$15,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Newark (43056)?
The median static water level is 65 ft below ground surface (middle half of wells: 35 ft–111 ft), from 1,168 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Licking County.
Part of Licking County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.