Ohio Well Data › Hardin County › Kenton (43326)
Kenton, OH (43326): well depth, water level & drilling cost
✓ 1,033 ODNR records · Hardin County
Pull every recorded well near a Kenton (43326) address — $49
How deep are wells in Kenton (43326), Ohio?
The median drilled well depth in Kenton (43326) is 97 ft, based on 1,032 wells with recorded depths in the state ODNR database. Half fall between 75 ft and 129 ft; 90% are shallower than 161 ft.
How much does it cost to drill a well in Kenton (43326)?
Applying published per-foot rates to the local median depth of 97 ft: drilling and casing alone typically runs $2,425–$6,305; a complete system including pump, pressure tank, and hookup typically runs $5,820–$9,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kenton (43326)?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–45 ft), from 1,015 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hardin County.
Part of Hardin County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.