Ohio Well Data › Wyandot County › Kirby (43330)
Kirby, OH (43330): well depth, water level & drilling cost
✓ 215 ODNR records · Wyandot County
Pull every recorded well near a Kirby (43330) address — $49
How deep are wells in and around Kirby (43330), Ohio?
The median drilled well depth in and around Kirby (43330) is 105 ft, based on 215 wells with recorded depths in the state ODNR database. Half fall between 82 ft and 121 ft; 90% are shallower than 138 ft.
How much does it cost to drill a well in and around Kirby (43330)?
Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Kirby (43330)?
The median static water level is 28 ft below ground surface (middle half of wells: 20 ft–39 ft), from 211 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wyandot County.
Part of Wyandot County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.