Ohio Well Data › Wood County › Walbridge (43465)
Walbridge, OH (43465): well depth, water level & drilling cost
✓ 205 ODNR records · Wood County
Pull every recorded well near a Walbridge (43465) address — $49
How deep are wells in and around Walbridge (43465), Ohio?
The median drilled well depth in and around Walbridge (43465) is 135 ft, based on 205 wells with recorded depths in the state ODNR database. Half fall between 105 ft and 157 ft; 90% are shallower than 170 ft.
How much does it cost to drill a well in and around Walbridge (43465)?
Applying published per-foot rates to the local median depth of 135 ft: drilling and casing alone typically runs $3,375–$8,775; a complete system including pump, pressure tank, and hookup typically runs $8,100–$13,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Walbridge (43465)?
The median static water level is 50 ft below ground surface (middle half of wells: 40 ft–58 ft), from 195 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wood County.
Part of Wood County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.