Ohio Well Data › Monroe County › Beallsville (43716)
Beallsville, OH (43716): well depth, water level & drilling cost
✓ 102 ODNR records · Monroe County
Pull every recorded well near a Beallsville (43716) address — $49
How deep are wells in Beallsville (43716), Ohio?
The median drilled well depth in Beallsville (43716) is 145 ft, based on 102 wells with recorded depths in the state ODNR database. Half fall between 101 ft and 220 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in Beallsville (43716)?
Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Beallsville (43716)?
The median static water level is 46 ft below ground surface (middle half of wells: 35 ft–80 ft), from 90 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Monroe County.
Part of Monroe County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.