Ohio Well Data › Guernsey County › Kimbolton (43749)
Kimbolton, OH (43749): well depth, water level & drilling cost
✓ 491 ODNR records · Guernsey County
Pull every recorded well near a Kimbolton (43749) address — $49
How deep are wells in Kimbolton (43749), Ohio?
The median drilled well depth in Kimbolton (43749) is 110 ft, based on 489 wells with recorded depths in the state ODNR database. Half fall between 80 ft and 160 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in Kimbolton (43749)?
Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kimbolton (43749)?
The median static water level is 48 ft below ground surface (middle half of wells: 30 ft–70 ft), from 454 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Guernsey County.
Part of Guernsey County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.