Ohio Well Data › Wayne County › Burbank (44214)
Burbank, OH (44214): well depth, water level & drilling cost
✓ 820 ODNR records · Wayne County
Pull every recorded well near a Burbank (44214) address — $49
How deep are wells in and around Burbank (44214), Ohio?
The median drilled well depth in and around Burbank (44214) is 100 ft, based on 819 wells with recorded depths in the state ODNR database. Half fall between 75 ft and 130 ft; 90% are shallower than 178 ft.
How much does it cost to drill a well in and around Burbank (44214)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Burbank (44214)?
The median static water level is 38 ft below ground surface (middle half of wells: 22 ft–60 ft), from 802 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wayne County.
Part of Wayne County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.