Ohio Well Data › Columbiana County › Negley (44441)
Negley, OH (44441): well depth, water level & drilling cost
✓ 311 ODNR records · Columbiana County
Pull every recorded well near a Negley (44441) address — $49
How deep are wells in Negley (44441), Ohio?
The median drilled well depth in Negley (44441) is 160 ft, based on 309 wells with recorded depths in the state ODNR database. Half fall between 83 ft and 265 ft; 90% are shallower than 340 ft.
How much does it cost to drill a well in Negley (44441)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Negley (44441)?
The median static water level is 75 ft below ground surface (middle half of wells: 31 ft–144 ft), from 281 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Columbiana County.
Part of Columbiana County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.