Ohio Well Data › Wayne County › Fredericksburg (44627)
Fredericksburg, OH (44627): well depth, water level & drilling cost
✓ 1,341 ODNR records · Wayne County
Pull every recorded well near a Fredericksburg (44627) address — $49
How deep are wells in Fredericksburg (44627), Ohio?
The median drilled well depth in Fredericksburg (44627) is 120 ft, based on 1,339 wells with recorded depths in the state ODNR database. Half fall between 90 ft and 165 ft; 90% are shallower than 210 ft.
How much does it cost to drill a well in Fredericksburg (44627)?
Applying published per-foot rates to the local median depth of 135 ft: drilling and casing alone typically runs $3,375–$8,775; a complete system including pump, pressure tank, and hookup typically runs $8,100–$13,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Fredericksburg (44627)?
The median static water level is 71 ft below ground surface (middle half of wells: 43 ft–111 ft), from 1,312 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wayne County.
Part of Wayne County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.