Ohio Well Data › Stark County › North Canton (44720)
North Canton, OH (44720): well depth, water level & drilling cost
✓ 602 ODNR records · Stark County
Pull every recorded well near a North Canton (44720) address — $49
How deep are wells in North Canton (44720), Ohio?
The median drilled well depth in North Canton (44720) is 120 ft, based on 602 wells with recorded depths in the state ODNR database. Half fall between 91 ft and 168 ft; 90% are shallower than 220 ft.
How much does it cost to drill a well in North Canton (44720)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in North Canton (44720)?
The median static water level is 41 ft below ground surface (middle half of wells: 23 ft–62 ft), from 596 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Stark County.
Part of Stark County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.