Ohio Well Data › Sandusky County › Bellevue (44811)
Bellevue, OH (44811): well depth, water level & drilling cost
✓ 678 ODNR records · Sandusky County
Pull every recorded well near a Bellevue (44811) address — $49
How deep are wells in Bellevue (44811), Ohio?
The median drilled well depth in Bellevue (44811) is 115 ft, based on 678 wells with recorded depths in the state ODNR database. Half fall between 97 ft and 138 ft; 90% are shallower than 150 ft.
How much does it cost to drill a well in Bellevue (44811)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bellevue (44811)?
The median static water level is 60 ft below ground surface (middle half of wells: 40 ft–78 ft), from 656 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sandusky County.
Part of Sandusky County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.