Ohio Well Data › Knox County › Butler (44822)
Butler, OH (44822): well depth, water level & drilling cost
✓ 932 ODNR records · Knox County
Pull every recorded well near a Butler (44822) address — $49
How deep are wells in and around Butler (44822), Ohio?
The median drilled well depth in and around Butler (44822) is 160 ft, based on 932 wells with recorded depths in the state ODNR database. Half fall between 115 ft and 202 ft; 90% are shallower than 260 ft.
How much does it cost to drill a well in and around Butler (44822)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Butler (44822)?
The median static water level is 80 ft below ground surface (middle half of wells: 45 ft–115 ft), from 877 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Knox County.
Part of Knox County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.