Ohio Well Data › Ashland County › Polk (44866)
Polk, OH (44866): well depth, water level & drilling cost
✓ 402 ODNR records · Ashland County
Pull every recorded well near a Polk (44866) address — $49
How deep are wells in and around Polk (44866), Ohio?
The median drilled well depth in and around Polk (44866) is 100 ft, based on 402 wells with recorded depths in the state ODNR database. Half fall between 74 ft and 130 ft; 90% are shallower than 152 ft.
How much does it cost to drill a well in and around Polk (44866)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Polk (44866)?
The median static water level is 35 ft below ground surface (middle half of wells: 25 ft–53 ft), from 390 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Ashland County.
Part of Ashland County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.