Ohio Well Data › Butler County › Hamilton (45011)
Hamilton, OH (45011): well depth, water level & drilling cost
✓ 377 ODNR records · Butler County
Pull every recorded well near a Hamilton (45011) address — $49
How deep are wells in Hamilton (45011), Ohio?
The median drilled well depth in Hamilton (45011) is 60 ft, based on 377 wells with recorded depths in the state ODNR database. Half fall between 46 ft and 75 ft; 90% are shallower than 100 ft.
How much does it cost to drill a well in Hamilton (45011)?
Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hamilton (45011)?
The median static water level is 22 ft below ground surface (middle half of wells: 15 ft–30 ft), from 299 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Butler County.
Part of Butler County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.