Ohio Well Data › Adams County › Lynx (45650)
Lynx, OH (45650): well depth, water level & drilling cost
✓ 203 ODNR records · Adams County
Pull every recorded well near a Lynx (45650) address — $49
How deep are wells in and around Lynx (45650), Ohio?
The median drilled well depth in and around Lynx (45650) is 60 ft, based on 203 wells with recorded depths in the state ODNR database. Half fall between 49 ft and 80 ft; 90% are shallower than 100 ft.
How much does it cost to drill a well in and around Lynx (45650)?
Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lynx (45650)?
The median static water level is 21 ft below ground surface (middle half of wells: 12 ft–35 ft), from 178 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Adams County.
Part of Adams County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.