Ohio Well Data › Vinton County › Ray (45672)
Ray, OH (45672): well depth, water level & drilling cost
✓ 216 ODNR records · Vinton County
Pull every recorded well near a Ray (45672) address — $49
How deep are wells in and around Ray (45672), Ohio?
The median drilled well depth in and around Ray (45672) is 80 ft, based on 216 wells with recorded depths in the state ODNR database. Half fall between 60 ft and 125 ft; 90% are shallower than 224 ft.
How much does it cost to drill a well in and around Ray (45672)?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ray (45672)?
The median static water level is 21 ft below ground surface (middle half of wells: 15 ft–40 ft), from 197 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Vinton County.
Part of Vinton County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.