Ohio Well Data › Paulding County › Payne (45880)
Payne, OH (45880): well depth, water level & drilling cost
✓ 257 ODNR records · Paulding County
Pull every recorded well near a Payne (45880) address — $49
How deep are wells in and around Payne (45880), Ohio?
The median drilled well depth in and around Payne (45880) is 61 ft, based on 256 wells with recorded depths in the state ODNR database. Half fall between 51 ft and 75 ft; 90% are shallower than 90 ft.
How much does it cost to drill a well in and around Payne (45880)?
Applying published per-foot rates to the local median depth of 61 ft: drilling and casing alone typically runs $1,525–$3,965; a complete system including pump, pressure tank, and hookup typically runs $3,660–$6,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Payne (45880)?
The median static water level is 10 ft below ground surface (middle half of wells: 8 ft–13 ft), from 252 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Paulding County.
Part of Paulding County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.