Ohio Well Data › Hocking County
Hocking County, Ohio: well depth, water level & drilling cost
✓ 5,082 ODNR records · verified 2026-09-28
Pull every recorded well near a Hocking County address — $49
How deep are wells in Hocking County, Ohio?
The median drilled well depth in Hocking County is 224 ft, based on 5,077 wells with recorded depths in the state ODNR database. Half of all wells fall between 120 ft and 345 ft; 90% are shallower than 400 ft. Wells drilled since 2016 have a median depth of 320 ft.
How much does it cost to drill a well in Hocking County?
Applying published per-foot rates to the local median depth of 320 ft: drilling and casing alone typically runs $8,000–$20,800; a complete system including pump, pressure tank, and hookup typically runs $19,200–$32,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hocking County?
The median static water level is 110 ft below ground surface (middle half of wells: 40 ft–230 ft), from 4,706 measurements.
How much water do wells in Hocking County produce?
The median tested yield is 10 gpm (middle half: 7 gpm–15 gpm), from 4,752 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Hocking County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
See every driller with wells on record in Hocking County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hocking County.
Well records by ZIP code in Hocking County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Logan (43138) — 2,064 wells, median 240 ft
- Rockbridge (43149) — 888 wells, median 280 ft
- Laurelville (43135) — 618 wells, median 140 ft
- South Bloomingville (43152) — 505 wells, median 200 ft
- New Plymouth (45654) — 282 wells, median 350 ft
- Union Furnace (43158) — 187 wells, median 280 ft
- Haydenville (43127) — 151 wells, median 80 ft
- Hallsville (45633) — 79 wells, median 70 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.