Ohio Well Data › Hocking County › Logan (43138)
Logan, OH (43138): well depth, water level & drilling cost
✓ 2,064 ODNR records · Hocking County
Pull every recorded well near a Logan (43138) address — $49
How deep are wells in Logan (43138), Ohio?
The median drilled well depth in Logan (43138) is 240 ft, based on 2,059 wells with recorded depths in the state ODNR database. Half fall between 150 ft and 340 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in Logan (43138)?
Applying published per-foot rates to the local median depth of 320 ft: drilling and casing alone typically runs $8,000–$20,800; a complete system including pump, pressure tank, and hookup typically runs $19,200–$32,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Logan (43138)?
The median static water level is 140 ft below ground surface (middle half of wells: 60 ft–220 ft), from 1,961 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hocking County.
Part of Hocking County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.