Ohio Well Data › Washington County
Washington County, Ohio: well depth, water level & drilling cost
✓ 1,216 ODNR records · verified 2026-06-29
How deep are wells in Washington County, Ohio?
The median drilled well depth in Washington County is 86 ft, based on 1,216 wells with recorded depths in the state ODNR database. Half of all wells fall between 64 ft and 120 ft; 90% are shallower than 160 ft. Wells drilled since 2016 have a median depth of 90 ft.
How much does it cost to drill a well in Washington County?
Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Washington County?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–55 ft), from 1,091 measurements.
How much water do wells in Washington County produce?
The median tested yield is 3 gpm (middle half: 1 gpm–12 gpm), from 918 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Washington County address — $19
Drilled depth distribution
Who drills wells in Washington County?
Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).
| Driller | Wells since 2016 |
|---|---|
| D & L DRILLING LLC | 49 |
| JET WATER WELL DRILLING | 39 |
| SMITH'S WELL DRILLING LLC | 11 |
| ROUX'S WATER WELL DRILLING | 5 |
| CLAIR WELL SERVICE | 5 |
| OHIO DRILLING COMPANY | 3 |
| WARTHMAN DRILLING INC | 2 |
| NATIONAL WATER SERVICES (DAYT) | 2 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Washington County
Median depth, water level, and yield for each ZIP code with recorded wells.
- New Matamoras (45767) — 56 wells, median 100 ft
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.