Ohio Well Data › Washington County › Little Hocking (45742)
Little Hocking, OH (45742): well depth, water level & drilling cost
✓ 81 ODNR records · Washington County
Pull every recorded well near a Little Hocking (45742) address — $49
How deep are wells in and around Little Hocking (45742), Ohio?
The median drilled well depth in and around Little Hocking (45742) is 110 ft, based on 81 wells with recorded depths in the state ODNR database. Half fall between 90 ft and 150 ft; 90% are shallower than 175 ft.
How much does it cost to drill a well in and around Little Hocking (45742)?
Applying published per-foot rates to the local median depth of 110 ft: drilling and casing alone typically runs $2,750–$7,150; a complete system including pump, pressure tank, and hookup typically runs $6,600–$11,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Little Hocking (45742)?
The median static water level is 46 ft below ground surface (middle half of wells: 35 ft–72 ft), from 74 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.