Ohio Well Data › Cuyahoga County › Berea (44017)
Berea, OH (44017): well depth, water level & drilling cost
✓ 103 ODNR records · Cuyahoga County
Pull every recorded well near a Berea (44017) address — $49
How deep are wells in and around Berea (44017), Ohio?
The median drilled well depth in and around Berea (44017) is 84 ft, based on 103 wells with recorded depths in the state ODNR database. Half fall between 64 ft and 111 ft; 90% are shallower than 125 ft.
How much does it cost to drill a well in and around Berea (44017)?
Applying published per-foot rates to the local median depth of 84 ft: drilling and casing alone typically runs $2,100–$5,460; a complete system including pump, pressure tank, and hookup typically runs $5,040–$8,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Berea (44017)?
The median static water level is 31 ft below ground surface (middle half of wells: 25 ft–43 ft), from 88 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Cuyahoga County.
Part of Cuyahoga County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.