⟁ Ohio Well Data field records · 2026 survey

Ohio Well Data › Cuyahoga County

Cuyahoga County, Ohio: well depth, water level & drilling cost

✓ 4,393 ODNR records · verified 2026-06-29

84 ftmedian well depth
60 ft–135 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (3,584 tests)

How deep are wells in Cuyahoga County, Ohio?

The median drilled well depth in Cuyahoga County is 84 ft, based on 4,389 wells with recorded depths in the state ODNR database. Half of all wells fall between 60 ft and 135 ft; 90% are shallower than 191 ft. Wells drilled since 2016 have a median depth of 113 ft.

How much does it cost to drill a well in Cuyahoga County?

Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Cuyahoga County?

The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–55 ft), from 3,853 measurements.

How much water do wells in Cuyahoga County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–15 gpm), from 3,584 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Cuyahoga County address — $19

Drilled depth distribution

0–50 ft 600 50–100 ft 1,971 100–150 ft 910 150–200 ft 523 200–300 ft 323 300–400 ft 49 400–600 ft 13 600+ ft 0

Who drills wells in Cuyahoga County?

Companies by number of wells completed in this county since 2016, per filed well logs (ODNR Division of Geological Survey).

DrillerWells since 2016
SOUTHWIND DRILLING COMPANY25
FREDEBAUGH WELL DRILLING11
ROBERT E BURROWS WELL DRILLING6
JAMISON WELL DRILLING INC5
DEPEW WELL DRILLING4
KEEN WELL AND PUMP4
ACES WELL SERVICE3
PATRIOT DRILLING3

Get quotes from local drillers

Looking at a specific property in Cuyahoga County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.