⟁ Ohio Well Data field records · 2026 survey

Ohio Well Data › Cuyahoga County › Gates Mills (44040)

Gates Mills, OH (44040): well depth, water level & drilling cost

✓ 419 ODNR records · Cuyahoga County

100 ftmedian well depth
70 ft–130 fttypical depth range
34 ftmedian static water level
8 gpmmedian yield (398 tests)

Pull every recorded well near a Gates Mills (44040) address — $49

How deep are wells in and around Gates Mills (44040), Ohio?

The median drilled well depth in and around Gates Mills (44040) is 100 ft, based on 418 wells with recorded depths in the state ODNR database. Half fall between 70 ft and 130 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Gates Mills (44040)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gates Mills (44040)?

The median static water level is 34 ft below ground surface (middle half of wells: 16 ft–68 ft), from 392 measurements.

Drilled depth distribution

0–50 ft 25 50–100 ft 175 100–150 ft 168 150–200 ft 32 200–300 ft 14 300–400 ft 3 400–600 ft 1 600+ ft 0
Looking at a specific property in Gates Mills (44040)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gates Mills (44040)

Free. Goes to licensed drillers working Cuyahoga County.

Part of Cuyahoga County well records.

Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.