Ohio Well Data › Cuyahoga County › Solon (44139)
Solon, OH (44139): well depth, water level & drilling cost
✓ 343 ODNR records · Cuyahoga County
Pull every recorded well near a Solon (44139) address — $49
How deep are wells in and around Solon (44139), Ohio?
The median drilled well depth in and around Solon (44139) is 134 ft, based on 343 wells with recorded depths in the state ODNR database. Half fall between 79 ft and 173 ft; 90% are shallower than 214 ft.
How much does it cost to drill a well in and around Solon (44139)?
Applying published per-foot rates to the local median depth of 134 ft: drilling and casing alone typically runs $3,350–$8,710; a complete system including pump, pressure tank, and hookup typically runs $8,040–$13,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Solon (44139)?
The median static water level is 48 ft below ground surface (middle half of wells: 27 ft–70 ft), from 326 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Cuyahoga County.
Part of Cuyahoga County well records.
Method: medians computed from ODNR records (water-supply wells only (domestic, public/municipal, commercial, industrial, agricultural/irrigation, fire protection) — monitoring, test/boring, heat-pump, injection, abandoned/sealed and unclassified wells excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.